Tourguide System Quick guide EK 2020 D

Tourguide System 2020 Quick guide EK 2020 D 6 Important safety instructions Please read this instruction manual carefully and completely before using the product. Make this instruction manual easily accessible
of 12
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Tourguide System 2020 Quick guide EK 2020 D 6 Important safety instructions Please read this instruction manual carefully and completely before using the product. Make this instruction manual easily accessible to all users at all times. Always include this instruction manual when passing the product on to third parties. Do not use the product in situations which require special attention (e.g. when performing skilled jobs). Always keep the product dry and do not expose it to extreme temperatures. Intended use of the product Intended use of the product includes: having read this instruction manual, especially the chapter Important safety instructions, using the product within the operating conditions and limitations described in this instruction manual. Improper use means using the product other than as described in this instruction manual, or under operating conditions which differ from those described herein. 1 Safety instructions for Lithium-Polymer rechargeable batteries If abused or misused, rechargeable batteries may leak or be damaged. In extreme cases, they may even present CAUTION! a heat hazard, a fire hazard, an explosion hazard, a smoke or gas hazard Keep away from children. Observe correct polarity. Do not expose to moisture. Do not continue to use defective rechargeable batteries. Only charge rechargeable batteries at ambient temperatures between 10 C/50 F and 40 C/104 F. Do not mutilate or dismantle. Dispose of rechargeable batteries at special collection points or return them to your specialist dealer. Do not short-circuit. Switch rechargeable batterypowered devices off after use. When not using rechargeable batteries for extended periods of time, charge them regularly (about every three months). Do not heat above 70 C/158 F, e.g. do not expose to sunlight or throw into a fire. Only charge rechargeable batteries with the appropriate Sennheiser chargers. Rechargeable batteries must only be replaced by authorized Sennheiser partners. 2 EK 2020 D The EK 2020 D receiver has been designed for use with the Tourguide System For details on the use of the receiver, please refer to the instruction manual of the overall system (ID No , 08/06). You can obtain the instruction manual separately from your Sennheiser dealer or download it from Delivery includes 10 EK 2020 D receivers 1 quick guide Product overview Volume control Channel selection button / Headphone socket Channel display Battery status display LC display LED for charge status ON/OFF button Volume display RF signal indication Overview of the LED indications LED Meaning shortly lights up green The receiver is correctly inserted into the charging compartment lights up red The rechargeable battery is being charged lights up green The rechargeable battery is fully charged slowly flashes red The temperature of the rechargeable battery is too high, charging is interrupted 3 Using the EK 2020 D You can connect an induction loop or any pair of headphones with a 3.5 mm mono or stereo jack plug to the headphone socket of the EK 2020 D. The headphone impedance must be 32 Ω or higher. Connect the induction loop or the 3.5 mm jack plug of your headphones to the headphone socket of the EK 2020 D. To switch the receiver on: Briefly press the ON/OFF button. The display switches on. To switch the receiver off: Press the ON/OFF button for 3 seconds. When you unplug the headphones from the receiver or switch off the transmitter, the receiver automatically switches off after 5 minutes. 4 Attaching the EK 2020 D to clothing or a belt Use the clip to attach the receiver to your clothing or your belt. Accessories and spare parts Only use original Sennheiser accessories and spare parts, otherwise the product quality can be impaired or the product can be damaged. Cat. No. Accessory/spare part EZT 3012 induction loop 5 Specifications Modulation RF frequency range RF frequency range (US) Channels for the Tourguide system for conferences AF frequency response Headphone output Power supply Operating time Charging time Dimensions Weight 2 FSK MHz MHz ,000 Hz 3.5 mm jack socket Lithium-Polymer rechargeable battery, 1,500 mah approx 16 hrs approx. 5 hrs 97,5 x 60,4 x 24,3 mm 75 g Type approvals In compliance with: Europe EMC EN /-9 Radio EN /-2, class 1 Safety EN USA 47 CFR 15 subpart B Approved by: Canada Industry Canada RSS 210 IC: 2099A-EK 2020 D 6 Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at or contact your Sennheiser partner. In compliance with the following requirements RoHS Directive (2002/95/EC) WEEE Directive (2002/96/EC) Please dispose of this product at the end of its operational lifetime by taking it to your local collection point or recycling center for such equipment. Battery Directive (2006/66/EC) The supplied batteries or rechargeable batteries can be recycled. Please dispose of them as special waste or return them to your specialist dealer. In order to protect the environment, only dispose of exhausted batteries. CE Declaration of Conformity 0682 R&TTE Directive (1999/5/EC) The declaration is available at Before putting the device into operation, please observe the respective countryspecific regulations. 7 Statements regarding FCC and Industry Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Changes or modifications made to this equipment not expressly approved by Sennheiser electronic Corp. may void the FCC authorization to operate this equipment. Before putting the device into operation, please observe the respective country-specific regulations! 8 Sennheiser electronic GmbH & Co. KG Printed in Germany Am Labor 1, Wedemark, Germany Publ. 03/ /A01
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!