of 45

Pinell Supersound PDF

35 views45 pages

Download

All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Pinell Supersound 301 Important Safety Instructions 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use the speaker near water. 6. Clean
Pinell Supersound 301 Important Safety Instructions 1. Read these instructions. 2. Keep these Instructions. 3. Heed all Warnings. 4. Follow all instructions. 5. Do not use the speaker near water. 6. Clean only with dry cloth. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS SPEAKER TO RAIN OR MOISTURE. To reduce the risk of electrical shock, fire, etc.: 1. Do not place unit near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 2. Do not attempt to use unit in temperatures outside the range of 0 ~ Do not block any ventilation openings of unit. 4. The unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the unit. 5. Do not place any heavy loads onto the unit, and do not step on it, the load may fall and cause serious injury to the unit. 6. Please read Rating Labels at the rear of unit for power input and other safety information. 7. This unit is intended to be used only with the power supply provided. 8. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at any point where they exit from the unit. 9. Never unplug your unit by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet. 10. Repair or replace all electric service cords that have become frayed or otherwise damaged immediately. Do not use a cord that shows cracks or abrasion damage along its length, the plug, or the connector end. 11. To prevent fire or shock hazard, do not use this plug with an extension cord or other outlet unless the blades can be fully inserted to prevent blade exposure. 12. During lightning or raining days, unplug the unit for additional protection during thunderstorms or when the unit is not used for prolonged periods. This will prevent damage to the unit from lightning and power surges. 13. Do not attempt to carry out any service work yourself. By opening or removing the cabinet, you may be exposed to dangerous voltage or other hazards. Any service work should be carried out by qualified technicians. 14. The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in other 2 location. 15. The means of disconnecting this apparatus from the mains supply is plug of adapter. The disconnect device shall remain readily operable. 16. In the interests of safety and to avoid unnecessary energy consumption, never leave the unit switched on while unattended for long periods of time, e.g. overnight, while on holiday or while out of the house. Switch it off and disconnect the mains plug from the mains socket. 3 Contents Important Safety Instructions... 2 Contents... 4 Your radio... 6 Front View... 6 Rear View... 6 Remote Control View... 7 Getting Started... 9 Setup Wizard Internet Radio Mode Local Country Selecting a station through Stations Selecting a program through Podcasts Getting Access Code and FAQ from Help Adding station to My Favourites Adding station to My Added Stations Viewing Station Information Storing Preset Stations Recalling a Preset Station Spotify Connect Spotify Premium Play Music via Spotify Connect Controlling Spotify Connect Using another Spotify account with your radio Music player Mode Sharing Media with Windows Media Player Playing Shared Media My Playlist Repeat Play Mode Shuffle Play Mode Clearing My Playlist Now Playing Information DAB Mode Selecting DAB Mode Selecting another Station Secondary Service Scanning Stations Manual Tune Prune Invalid DRC (Dynamic Range Control) value Changing Station Order Viewing Station Information Storing Preset Stations Recalling a Preset Station FM Mode Selecting FM Mode Scan settings Audio Settings Viewing Station Information Storing Preset Stations Recalling a Preset Station Aux in Mode Bluetooth Mode Wireless Control App - UNDOK General Operation Setting Sleep Setting Alarm Setting Equaliser Network Setup Setting Time/Date Setting Language Factory Reset Software Update Over the network Setup Wizard Viewing System Info Setting Backlight Multi-room Troubleshooting Specifications Your radio Front View 1. Speaker 2. Remote control sensor 3. MENU button Press to display or exit menu screen. 4. VOLUME knob Turn to adjust volume level. 5. MODE button Press to switch among Internet, Spotify, Music player, DAB, FM, Aux in and Bluetooth mode. 6. STANDBY button Press to turn on the radio or switch to standby mode. 7. BACK button Press to return to previous menu screen. 8. SCROLL knob Turn to browse options. Press to confirm selection. Press to activate snooze function when alarm sounds. 9. INFO button Press to browse station information. 10. PRESET 1-5 buttons Press and hold to directly save station. Press to directly play saved station. 11. Display Rear View 1. DAB/FM antenna 2. Headphones socket 3. AUX IN socket 4. DC IN socket 6 Remote Control View 1. STANDBY/ON button Press to switch radio on or standby. 2. BACKLIGHT button Press to set backlight. 3. MODE buttons Press to switch among Internet, Spotify, Music player, DAB, FM, Aux in and Bluetooth modes. 4. EQ button Press to set EQ. 5. VOL +/- buttons Press to adjust volume level. 6. MUTE button Press to mute radio or resume sound. 7. button (Music player and Bluetooth mode) Press to skip to previous track; press and hold to fast reverse current track. 8. button (Music player and Bluetooth mode) Press to skip to next track; press and hold to fast forwards current track. 9. SELECT button Press to confirm selection. buttons Press to browse options. 10. MENU button Press to display or exit menu screen. 11. button (Music player and Bluetooth mode) Press to pause or play current track. 12. SLEEP button Press to set up sleep time. 13. SNOOZE button Press to activate snooze function when alarm sounds. 14. ALARM buttons Press to set alarm 1 or alarm SCAN button Press to automatically scan for available stations in DAB and FM mode. 16. INFO button Press to view station information. 17. CLOCK ADJ button Press to set clock buttons Press and hold to save preset stations. Press to recall a saved preset station. 7 Replacing batteries: 1. Open the battery compartment cover at the back of your remote control. 2. Install 2pcs new AAA size batteries, referring to the markings direction inside the battery compartment. Note: do not reverse any battery and do not mix battery types, also do not mix old and new batteries. When discard your old battery, please considering eco-friendly. 3. Cover the battery compartment door. 8 Getting Started Carefully remove your radio from the box. You may wish to store the packaging for future use. What you can find inside of your package Main unit x 1 Power adapter x 1 Remote control x 1 + AAA alkaline battery x 2 Quick start guide x 1 Positioning your Radio Place your radio on a flat / stable surface that is not subject to vibrations. Avoid the following locations: Where the unit will be exposed to direct sunlight. Where the unit will be close to heat radiating sources. Where the humidity is high and ventilation is poor. Where it is dusty. Where it is damp or there is a possibility of water dripping or splashing onto unit. Adjusting the Antenna Fully extend antenna to ensure you receive the best reception possible in both DAB and FM radio modes. It may be necessary to adjust the position of the radio and/or antenna to achieve the best signal. Turning the Unit On/Off Connect the plug at the end of power adapter cable to the DC IN socket on the rear of unit. Then insert the power adapter into the mains socket. The radio will go to standby. Press STANDBY button to turn on the radio. To turn off unit completely, unplug the power adapter from the mains socket. Automatically Setting the Clock The clock can be set and updated automatically if are connected to the internet or receive DAB/FM signals in your location. In order for the clock to synchronize to the current local time you must leave it on an Internet Radio, DAB or FM station for a short period of time. You can also choose how you would like to keep the clock up to date the Internet, DAB or FM radio signals. Go to Main menu - System settings - Time/Date - Auto update. Volume Control Turn VOLUME knob anti-clockwise to decrease volume and turn clockwise to increase volume. 9 Using Headphones You will require headphones fitted with a 3.5 mm diameter stereo plug. The Headphones socket is located at the rear of unit. Headphones are not supplied with this radio. Turn down the volume before connecting headphones. Slowly raise the volume with the headphones on until you reach your desired level. Caution: long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using headphones, especially for extended periods of time. Wireless LAN Setting A broadband Internet connection. A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router. If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) data encryption then you need to know the WEP or WPA code so you can get the radio to communicate with the network. If your wireless network is configured for trusted stations you will need to enter the Radio s MAC address into your wireless access point. To find the Radio s MAC address use menu items as follows: Main menu - System settings - Network - View settings - MAC address. Before you continue, make sure that your wireless access point is powered up and connected to your broadband Internet. To get this part of the system working, read the instruction supplied with the wireless access point is highly recommended. 10 Setup Wizard 1. For initial use, radio will ask you to choose the language. 2. You will then be shown Setup wizard screen. 3. Press SCROLL knob to confirm YES to start setup. Options in the setup wizard include the following: Date/Time Set 12 or 24 hour format Auto update Synchronously update clock from the playing program you selected or set by yourself. Update from DAB Update from FM Update from Network Select your time zone and daylight savings is needed. No update Set the date and time is needed. Keep network connected Keeps network connected especially in non-internet mode (i.e. DAB, FM, Bluetooth and Aux in mode) to enable you can use Spotify all the time. Select YES or NO 4. The Wizard will now scan your location for accessible wireless networks. When the scan has finished, a list of networks will be displayed. Devices that support connection via WPS (Wi-Fi Protected Setup) are identified in the list as [WPS]. 5. Turn SCROLL knob and then press it to select a wireless network you wanted. 1) If a WEP/WPA key (password) is required, radio will ask you to input the WEP/WPA code and display the password entry screen as follows: 11 Note: If a password (WEP/WPA) isn t required by your network, radio will connect to the network automatically. a. Turn SCROLL knob to cycle through the alphanumeric character list, press SCROLL knob to select an appointed character. Note: WEP/WPA pass codes are case-sensitive. b. If a wrong operation is being conducted, select to delete designated character. Note: = Backspace; means return to previous track; radio will automatically save the WEP/WPA you ve input, so no bother to reenter these codes. c. After selecting the final character of your password, turn SCROLL knob to wireless network., and then press SCROLL knob to confirm. The radio is connected to 2) If you wish to establish a connection via WPS, press SCROLL knob after you have selected desired network. The radio then offers the option to initiate WPS. Turn SCROLL knob to select through Push Button, Pin and Skip WPS, press SCROLL knob to confirm. Push Button You must start the WPS scan on the remote station (e.g. router). Consult the manual for your router or Access Points (AP) to learn how to do this. After you have done this, press SCROLL knob on the radio and then both devices will establish a connection. Pin The radio creates an 8-digit number, which you then have to enter into the remote station. After entering the PIN, press the SCROLL knob to establish the connection between both devices. Skip WPS In addition to a WPS connection, you can also establish a connection using a Pre-Shared-Key. The required key is often on the rear of the router, or you may have defined it yourself. This method is used automatically for networks without WPS. You can call up the Pre-Shared-Key function on networks with WPS by selecting menu item Skip WPS. An input field should now appear. You can enter the required key (PSK) by turning SCROLL knob and then pressing SCROLL knob, and then select OK and press SCROLL knob complete the entry. The radio should now establish the connection to the network. 6. Setup wizard completed, press SCROLL knob again to exit. 12 Internet Radio Mode 1. The display will show Main menu after Setup wizard completed. Press SCROLL knob to select Internet radio mode. 2. While Station list is highlighted, press SCROLL knob to confirm. 3. Then refer following section to choice stations. Or if failed to connect to network, please follow: a. Check your Router, see it working normally or not; b. Relocate your radio to a stronger signal position is necessary. c. Make sure your password is correct input. Local Country Local Country will change according to your current location (e.g. Local China). It displays local stations of your current location. 1. To enter local stations, press MENU button - Station list - Local Country, press SCROLL knob to confirm. 2. Station genres are listed. Turn SCROLL knob to select the genre you wanted, and then press SCROLL knob to confirm. 3. Turn SCROLL knob to select you desired station, and then press SCROLL knob to confirm broadcasting. 13 Selecting a station through Stations Stations enables you to select a station from categories: Location, Genre, Popular stations or New stations, or search stations. 1. Press MENU button - Station list - Stations, press SCROLL knob to confirm. 2. In Stations menu: Location enables you to choose from the radio stations provided by any country which you choose from a list. a. While Location is highlighted, press SCROLL knob to confirm. b. Turn SCROLL knob to select the region you wanted, and then press SCROLL knob to confirm. c. Turn SCROLL knob to select the country you wanted, and then press SCROLL knob to confirm. d. Turn SCROLL knob to select the station you wanted, and then press SCROLL knob to confirm. The station will be broadcast. Genre enables you to choose radio stations according to their content, for example Classic Rock, Sport, News, etc. a. While Genre is highlighted, press SCROLL knob to confirm. b. Turn SCROLL knob to select the genre you wanted, and then press SCROLL knob to confirm. c. Turn SCROLL knob to select through All Stations, Highlighted Stations or the country you wanted, and then press SCROLL knob to confirm. d. Turn SCROLL knob to select the station you wanted, and then press SCROLL knob to confirm. The station will be broadcast. Search stations enables you to enter all or part of station name to find a station. Popular stations enables your radio to list the stations that have the most listeners. New stations enables your radio to list the stations that have recently joined the Internet radio network. Note: Some radio stations do not broadcast 24 hours per day, and some stations are not always online. 14 Selecting a program through Podcasts Podcasts enables you to select a podcast from categories: Location or Genre, or search podcasts. 1. Press MENU button - Station list - Podcasts, press SCROLL knob to confirm. 2. In Podcasts menu: Location enables you to choose from the podcasts provided by any country which you choose from a list. a. While Location is highlighted, press SCROLL knob to confirm. b. Turn SCROLL knob to select the region you wanted, and then press SCROLL knob to confirm. c. Turn SCROLL knob to select the country you wanted, and then press SCROLL knob to confirm. d. Turn SCROLL knob to select All Shows or By Genre, and then press SCROLL knob to confirm. e. Turn SCROLL knob to select the podcast you wanted, and then press SCROLL knob to confirm. The podcast will be played. Genre enables you to choose radio stations according to their content, for example Classic Rock, Sport, News, etc. a. While Genre is highlighted, press SCROLL knob to confirm. b. Turn SCROLL knob to select the genre you wanted, and then press SCROLL knob to confirm. c. Turn SCROLL knob to select the podcast you wanted, and then press SCROLL knob to confirm. The podcast will be played. Search stations enables you to enter all or part of podcast name to find a podcast. 15 Getting Access Code and FAQ from Help 1. Press MENU button - Station list - Help, press SCROLL knob to confirm. 2. Turn SCROLL knob to select Get access code or FAQ, and then press SCROLL knob to confirm Get access code It uses for creating an account when registering your radio on portal com Refer to section Adding station to My Favourites. FAQ Turn SCROLL knob to select question, and then press SCROLL knob to listen the FAQ. Adding station to My Favourites You have two ways to add your favorite stations to My Favourites list. It will make you easier to find the stations that you like. Adding a station while listening to it 1. While you are listening to an internet radio station, press and hold SCROLL knob until display shows Favourite added. 2. The station will now be stored in a folder called Stations. Any station stored in this way will be placed in the Stations folder. Adding stations via the website 1. To register your radio with the portal: 2. Create account login, enter Access code is required. Access code can be found from Station list - Help - Get access code. 16 3. To add a Favourite Station, first find a station and then click the Add icon. 4. After you added the stations, in order to have your radio access your new settings, get your radio power off for several minutes is necessary. 5. The added stations are accessible by pressing MENU button - Station list - My favourites. Note: doing a factory reset cannot erase my favourites stations. Adding station to My Added Stations Even though the Internet radio portal contains thousands of stations, you may want to listen to stations not listed. You can add your own stations via the portal (www. wifiradio-frontier.com). 1. Visit portal www. wifiradio-frontier.com and login as a member as you registered when adding station to My favourites. 2. To add your own station, click the icon. 3. After you added the stations, in order to have your radio access your new settings, get your radio power off for several minutes is necessary. 4. The added stations are accessible by pressing MENU button - Station list - My added stations. Note: doing a factory reset cannot erase my added stations. 17 Viewing Station Information Internet programs broadcast additional information. Press INFO button repeatedly while a program is playing, the display will show the information through Station Description, Genre, Country, Reliability, Bit rate, Codec, Sampling Rate, Playback Buffer and Date. Storing Preset Stations Your radio can store up to 5 of your favourite Internet stations. This will enable you to access your favourite stations quickly and easily. 1. While playing your favourite station, press and hold one of PRESET buttons 1-5 until display shows Preset stored. 2. Preset number # will show on the display. Recalling a Preset Station 1. Press one of PRESET buttons 1-5 to play the saved preset station. 2. The display will show Preset Empty if the preset station isn t allocated. 18 Spotify Connect Your radio has Spotify Connect built
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks