Pets & Animals

Operating Manual. Display B22W-7 LED

Description
Operating Manual Display B22W-7 LED Congratulations on your purchase of an innovative product from Fujitsu. Latest information about our products, tips, updates etc. can be found on the Internet at: http://www.fujitsu.com/fts/
Categories
Published
of 41
107
Categories
Published
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Share
Transcript
Operating Manual Display B22W-7 LED Congratulations on your purchase of an innovative product from Fujitsu. Latest information about our products, tips, updates etc. can be found on the Internet at: http://www.fujitsu.com/fts/ You can find driver updates at: http://support.ts.fujitsu.com/download Should you have any technical questions, please contact: our Hotline/Service Desk (see the Service Desk list or visit: http://support.ts.fujitsu.com/contact/servicedesk ) Your sales partner Your sales office We hope you enjoy working with your new Fujitsu system! Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße Munich, Germany http://www.fujitsu.com/fts/ Copyright FujitsuTechnology Solutions GmbH All rights reserved. Publication Date 05/2013 Order No.: A26361-K1472-Z , edition 1 B22W-7 LED Operating Manual Your LCD screen... 5 Important notes 7 Getting started 11 Operation 19 Notes on ergonomic colour adjustment 29 Troubleshooting 30 Explanatory information about standard ISO Technical specification 33 Remarks Notes on the product description meet the design requirements of Fujitsu and are provided for the purposes of comparison. The actual results may differ due to several factors. Subject to technical changes without prior notification. Fujitsu accepts no responsibility for technical or editorial mistakes or omissions. Trademarks Fujitsu and the Fujitsu logo are registered trade marks of Fujitsu Limited or its subsidiaries in the United States and other countries. Microsoft and Windows are trademarks or registered trademarks of the Microsoft Corporation in the United States and/or other countries. VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association. All other trademarks specified here are the property of their respective owners. Copyright No part of this publication may be copied, reproduced or translated without the prior written consent of Fujitsu. No part of this publication may be saved or transmitted by any electronic means without the written consent of Fujitsu. Contents Contents YourLCDscreen Targetgroup... 5 Furtherinformation... 6 Notational conventions... 6 Importantnotes... 7 Safetyinstructions... 7 Powercable... 8 Transporting the device... 8 Cleaningthedevice... 9 CEmarking... 9 Disposal and recycling Gettingstarted Unpacking and checking the delivery Settingupthedevice Setting up an ergonomic video workstation Mounting the monitor base Adjustingheight Adjustingtheinclination Removingmonitorbase Connecting the device Connecting cables to the computer Operation Switching the deviceonandoff Notes on powermanagement Changing the monitorsettings Changing the monitor settings with the buttons of the control panel Changing themonitorsettingsusingtheosdmenu Notesonergonomiccolouradjustment Troubleshooting Explanatory information about standard ISO Technical specification VESA-DDC-compatibleVGAinterface Preset operating modes Most frequent operating modes SUB D port DVI-D port DisplayPortsocket Fujitsu 3 Contents 4 Fujitsu Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: TFT display (Thin Film Transistor; active matrix) minimal space requirements thanks to slim casing optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) high degree of brightness and good contrast high resolution (1680 x 1050) presentation of up to 16.7 million colours (in conjunction with an appropriate display adapter) automatic scanning of horizontal frequencies from 30 to 82 khz and refresh rates (vertical frequencies) from 56 to 76 Hz (absolutely flicker-free) Digital screen controller with microprocessor for storing 40 different display modes freely adjustable colour alignment for matching the screen colours to the colours of various input and output devices convenient operation via integrated OSD (On-Screen-display) menu VESA-DDC compatibility VESA-FPMPMI compatibility (Flat Panel Monitor Physical Mounting Interface) Mounting device for swivel arm or a similar accessory Plug&Play capability digital video inputs (DVI and DisplayPort) with HDCP power management for reducing power consumption when the computer is not in use Compliance with the recommendations according to TCO 6.0 the monitor fulfills all GS ( Geprüfte Sicherheit , Certified Security) requirements. This operating manual contains important information you require to start up and run your LCD monitor. A graphics card (display adapter) with a VGA interface or a digital graphics card with a DVI or DisplayPort interface is required to control the LCD monitor. The monitor processes the data supplied to it by the graphics card. The graphics card or the associated driver software is responsible for setting the modes (resolution and refresh rate). When putting the monitor into operation for the first time, the screen display should be optimally adapted to the display adapter used and adjusted in accordance with your needs (see chapter Changing the monitor settings , Page 21). Target group You don t need to be an expert to perform the operations described here. Nonetheless, it is important to always observe the safety notes given in the operating instructions for the computer and in this manual. In the event of any problems, please contact your sales office or our Service Desk. Fujitsu 5 Your LCD screen... Further information Details of how you set the resolution and refresh rate are provided in the documentation for your display adapter and the associated driver software. For ergonomic reasons, we recommend a screen resolution of 1680 x 1050 pixels. Because of the technology used (active matrix) an LCD monitor provides a totally flicker-free picture even with a refresh rate of 60 Hz. Notational conventions Pay particular attention to text marked with this symbol. Failure to observe these warnings could pose a risk to health, damage the device or lead to loss of data. The warranty will be invalidated if the device becomes defective through failure to observe these warnings. Indicates important information for the proper use of the device. This font This font This font This font Key This font Indicates an activity that must be performed Indicates a result indicates data entered using the keyboard in a program dialogue or at the command line, e.g. your password (Name123) or a command used to start a program (start.exe) indicates information that is displayed on the screen by a program, e.g.: Installation is complete. indicates terms and texts used in a software interface, e.g.: Click on Save names of programs or files, e.g. Windows or setup.exe. indicates cross-references to another section, e.g. Safety information cross-references to an external source, e.g. a web address: For more information, go to http://www.fujitsu.com/fts/ Names of CDs, DVDs and titles or designations of other materials, e.g.: CD/DVD Drivers & Utilities or Safety Manual indicates a button on the monitor, e.g: MENU indicates terms and texts that are emphasised or highlighted, e.g.: Do not switch off the device 6 Fujitsu Important notes Important notes Importantnotes Notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. If you have any questions about whether the device can be used in the intended environment, please contact your sales office or our Service Desk. The display surface of the device is sensitive to pressure and scratches. You should therefore be careful with the display surface in order to avoid lasting damage (scratches). If the device is brought into the installation site from a cold environment, condensation can form. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site. When installing and operating the device, please observe the notes on environmental conditions in Chapter Technical specification , Page 33 as well as the instructions in Chapter Setting up an ergonomic video workstation , Page 12. To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear. The device automatically sets itself to the correct voltage within the range from 100 V to 240 V. Make sure that the local mains voltage is neither higher nor lower than this range. Ensure that the power socket on the device and the mains outlet are freely accessible. The ON/OFF switch does not disconnect the monitor from the mains voltage. To disconnect fully from the mains supply, disconnect the power plug from the socket. The device is equipped with a power cable that complies with safety standards. Use the supplied power cable only. Lay the cables in such a way that they do not create a hazard (danger of tripping) and cannot be damaged. When connecting the device, observe the relevant notes in chapter Connecting the device , Page 17. No data transfer cables should be connected or disconnected during a thunderstorm. Make sure that no objects (e.g. jewellery chains, paper clips, etc.) or liquids get inside the device (danger of electric shock, short circuit). The device is not waterproof! Never immerse the device in water and protect it from spray water (rain, sea water). In an emergency (e.g. damaged casing, operation controls or cables, penetration of liquids or foreign matter), switch off the device, disconnect the power plug and contact your sales outlet or our Service Desk. Repairs to the device must only be performed by qualified technicians. Unauthorised opening and incorrect repair may greatly endanger the user (electric shock, fire risk). Only use the screen resolution settings and refresh rates specified in chapter Technical specification , Page 33. Otherwise you may damage the device. If you are in any doubt, contact your sales outlet or our Help Desk. Use a screen saver with moving images and activate the power management for your monitor to prevent still images from burning in . If you operate the device with the swivel arm or a similar accessory, it must not be turned by 180. Fujitsu 7 Device, Transportation Retransportation Important notes The device must only be operated in landscape mode (0 ) and portrait mode (90 ). The control buttons are located in the middle of the bottom of the monitor in landscape mode (0 ) and at the left-hand side of the monitor in portrait mode (90 ). Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it. We recommend that you place your device on a durable, non-slip surface. In view of the many different finishes and varnishes used on furniture, it is possible that the feet of the device may mark the surface they stand on. To ensure sufficient ventilation, the air supply and air outlet openings of the monitor must never be blocked. The device must be connected to protective earth. To prevent possible hearing damage, do not listen at high volume levels for long periods. Warning for excessive sound pressure from earphones and headphones: Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphones and headphones output voltage and therefore the sound pressure level. Power cable Use the supplied power cable only. Use the following guidelines if it is necessary to replace the original cable set. The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements. The cable has to be HAR-certified or VDE-certified. The mark HAR or VDE will appear on the outer sheath. For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. For devices which sit on the floor, only SJT type cable sets may be used. The cable set must be selected according to the rated current for your device. If necessary, replace the original power cable with a regular grounded 3-core mains lead. Transporting the device Transport all parts separately in their original packaging or in a packaging which protects them from knocks and jolts, to the new site. Do not unpack them until all transportation manoeuvres are completed. If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site. 8 Fujitsu Important notes Cleaning the device Switch off the device and unplug the power plug. Do not clean any interior parts yourself, leave this job to a service technician. Do not use any cleaning agents that contain abrasives or may corrode plastic. Ensure that no liquid enters the device. The display surface of the device is sensitive to pressure and scratches. Clean it only using a soft, slightly moistened cloth. The surface of the casing can be cleaned with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild domestic detergent and then carefully wrung out. CE marking The shipped version of this device complies with the requirements of European Union directives 2004/108/EC Electromagnetic compatibility , 2006/95/EC Low voltage directive and 2009/125/EC Ecodesign Directive . Fujitsu 9 Important notes Disposal and recycling This device has been manufactured as far as possible from materials which can be recycled or disposed of in such a way that the environment is not damaged. The device may be taken back after use to be reused or recycled, provided that it is returned in a condition that befits its intended use. Any components not reclaimed will be disposed of in an environmentally acceptable manner. The device must be disposed of in accordance with the local regulations for disposal of special waste. If you have any questions on disposal, please contact your local sales office or our Service Desk, or contact one of the following directly: Germany Belgium Switzerland Fujitsu Technology Solutions GmbH Remarketing and Recycling D Paderborn Tel.: / Fax: / http://fujitsu.com/fts/remarketing Asia Taiwan: Environmental Protection Administration Executive Yuan R.O.C. http://recycle.epa.gov.tw RECUPEL Boulevard Reyers, 80 B-1030 Brussels Tel.: / Fax: / http://www.recupel.be USA Fujitsu America, Inc. 1250E. Arques Avenue Sunnyvale, CA U.S.A. Phone No.: (408) SWICO Schweizerischer Wirtschaftsverband der Informations-, Kommunikations- und Organisationstechnik AlistoftheSWICOacceptance locations can be found at: http://www.swico.ch You can also find more information on this at http://www.fujitsu.com/fts/about/fts/environment-care/ . 10 Fujitsu Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: one monitor one data cable (DVI) one data cable (VGA) one USB cable one audio cable one power cable one CD with software and documentation one Warranty Booklet one Quick Start Guide brochure one Safety/Regulations manual Unpack all the individual parts. Check the contents of the package for any visible damage caused during transport. Check whether the delivery conforms to the details in the delivery note. Should you discover that the delivery does not correspond to the delivery note, notify your local sales outlet immediately. Do not discard the original packing material of the devices. You may need the packaging in the future if you need to transport your device. Fujitsu 11 Getting started Setting up the device To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear. Setting up an ergonomic video workstation Do not position the video workstation opposite a window (1). 1 1 Position the monitor outside the reach of a light source (1). 12 Fujitsu Getting started Position the keyboard where it is easiest to reach (1). 1 Position the monitor so that the eye distance to the screen (1) is around 50 cm cm Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2). Depending on the situation, it may be advisable to use a swivel arm or similar accessory (VESA FPMPMI), which are available from specialist dealers. For this purpose the monitor base must be removed beforehand as described in Chapter Removing monitor base , Page 16. Fujitsu 13 Getting started Mounting the monitor base Do not remove the retaining splint before you have secured the base plate on the monitor and have brought it into operating position. 1 Insert the base plate on the foot (1). Guide the screw through the opening (2). Secure the base plate with the screw (3). Place the monitor in operating position Fujitsu Getting started Adjusting height The height adjustment is fixed in the transport position. To free the fixing, remove the locking pinontheflange (1). The height of the monitor can be adjusted by approximately 130 mm. Grasp the monitor with both hands on the right and left edge of the casing and move it up or down (2). 2 1 Adjusting the inclination The inclination of the monitor can be adjusted by -3 (forwards) and +35 (backwards) from its vertical position. Hold the monitor with both hands on the left and right sides of the casing and move it to the desired angle. Fujitsu 15 Getting started Removing monitor base Before you can use a swivel arm or a similar accessory, you must remove the monitor base. The display surface is susceptible to scratching! Switch off the monitor and pull the power plug out of the power socket. Lay the monitor on its face on a soft surface. Remove the cover and disconnect all cables Release the base stand by pressing the slider down (1). Move it in the direction of the arrow (2) and lift the base stand upwards (3). You can now mount a swivel arm or a similar accessory in accordance with VESA FPMPMI using a hole spacing of 100 mm. For instructions on how to mount the swivel arm or a similar accessory, please see the documentation for the swivel arm or similar accessory. 16 Fujitsu Getting started Connecting the device Please observe the safety information in Important notes , Page 7. CE conformance and optimum picture quality are guaranteed only if you use the data cables supplied. Switch off the monitor and the computer. Disconnect the power plug from the computer. Connecting cables to the monitor The data cables supplied have two 15-pin D-SUB connectors or two 24-pin DVI connectors for connection to the monitor and to the computer. Informationonthecomputer connections and interfaces is contained in the operating manual for the computer = Security slot for Security Lock 2 = Power connector 3 = AUDIO-IN socket 4 = DisplayPort socket 5 = DVI-D socket (DVI) 6 = D-SUB socket (VGA) 7 = AUDIO-OUT socket 8 = USB IN (Downstream) 9 = USB OUT (Upstream) Select the appropriate data cable for your computer. Fujitsu 17 Getting started Connect one of the connectors of the data cable to the D-SUB, DVI-D or DisplayPort socket of the monitor and secure the plug-in connection by tightening the safety screws. The monitor automatically detects the input when only one signal source is connected. Insert one plug of the audio line in the AUDIO IN socket on the monitor and make sure it is properly engaged. Plug the power cable supplied into the power connector of the monitor. Plug the supplied USB cable into the USB IN socket and the other end of the cable into a USB socket of the computer. Connect the USB keyboard and USB mouse directly to the PC, as the USB connector socket of the monitor is switched off in energy-saving mode. A lock (Security Lock) can be mounted in the security slot to protec
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x