Kee Ibolt Product Guide

of 6
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
   YOU’LL NEVER BE BETTER PROTECTED  Safety Eyebolt Solutions ã  CE APPROVED TO PPE DIRECTIVE ã  SUITABLE FOR USE IN TENSION AND IN SHEAR ã  COMPREHENSIVE RANGE OF EYEBOLTS AND ACCESSORIES 0194  The KEE I-BOLT  range offers a comprehensive selection of Class A1 safety anchors. The RINGANKA   portfolio comprises three different lengths of eyebolt suitable for use in a range of materials; brick, concrete, masonry and steel. However, it is important that the correct eyebolt is used to suit the material and that the positioning is determined by a competent person. KEYANKA   is a removable eyebolt which is unobtrusive where visual presentation is important. Each of the products has been independently tested at the National Engineering Laboratory and is CE approved to meet the PPE Directive. As a leading supplier of fall protection solutions, Kee Safety   offers a range of collective and personal protection products including KEEGUARD , KEE DOME , KEE ANCHOR  and KEE ROOFPOINT . Our technical team can offer practical assistance in all aspects of design, installation and compliance with relevant standards for each of the products.  The Removable Safety Solution for Fall Protection By using a correctly installed and tested I-BOLT  system you can ensure the health and safety of anybody who works in an environment which calls for safe and tested fall protection. The KEYANKA   safety eyebolt offers a removable unobtrusive solution to traditional eyebolts for use in more prestigious buildings. The permanently installed grade 316 stainless steel anchor socket is concealed by a ush tting white plastic cover, which blends in with most interior designs. Equipped with the KEYANKA   eyebolt at the end of their lanyard, the operator uses a simple `key’ action with sprung locking movement, to provide a fast and safe attachment. The eyebolt is able to rotate 180˚ whilst still attached to the socket to provide the best orientation in event of a fall arrest situation, and can only be removed by ve simple, separate but deliberate, sequential movements.  Why you need KEYANKA   ã  Independently tested at N.E.L. (National Engineering Laboratory, East Kilbride, N.B. 0320) ã  Conforms to CLASS A1 EN 795, BS 7883 & ISO 14567 ã  CE Approved to PPE Directive ã  Removable Eyebolt ã  Produced from Grade 316 Stainless Steel ã  Flush fitting white plastic cover to blend in  with most interior designs ã  Spring loaded locking action ã  Variety of fixing options including concrete, brick, steelwork and cavity walls ã  Optional Stainless Steel or Brass Cap KEYANKA in SteelworkKEYANKA in Masonry ‘Kee’ Features of KEYANKA  NOTES: 1  KEY-STEEL   must never  be used with any thread protruding. 2   When using KEY-EXTSOC  extension sockets, the KEYANKA   (KEY-STEEL) must be fully screwed in to the collar. 3  KEYANKA   and extension sockets should be ordered separately. KEY-CONC  Standard KEYANKA   socket suitable for resin bonding into minimum 150mm thick concrete ONLY. NO cantilever permitted. KEY-BRICK   Standard KEYANKA   socket with knurled extension suitable for resin bonding into min. 225mm thick solid masonry. NO cantilever permitted. KEY-THRO  Standard KEYANKA   socket with additional M12 threaded extender. For use as through bolt xing (e.g. in cavity walls).  NO cantilever permitted.  Other Applications RINGANKA   is a comprehensive range of Class A1 safety eyebolts conforming to EN 795, BS 7883 and ISO 14567. RINGANKA   eyebolts for use in brick, concrete and masonry have a 16mm diameter unthreaded shank to ‘plug’ a drilled hole, thus reducing the bending effects which would result in earlier failure during shear loading. These safety eyebolts can be used by xing to an outside or inside face of a structural element adjacent to a window or other access. They are manufactured from either high tensile carbon steel with a galvanised or plastic-coated nish, or grade 316 stainless steel. Class A1 Anchor Devices KEYANKA   bracket to bridge void under oors, above ceilings or behind cladding. For direct axial loading only – unless the cladding etc. provides adequate resistance to bending. Use in conjunction with KEY-STEEL, or, if A is greater than 25mm, KEY-ADJ . KEYANKA   bridge, sockets and locknuts should be ordered as separate items. Cantilever Sockets for KEYANKA  KEY-CANT  Knurled cantilever socket for use in conjunction with standard KEY-STEEL KEYANKA socket in concrete and masonry. CodeMax. Cantilever (mm)Min. Embedment (mm)Min. Socket Length (mm) KA-CANT175 65110175 KA-CANT200 75120195 KA-CANT225 100125225 KA-CANT270 125140265 KA-CANT335 150160310 KA-CANT380 175180355 CodeMax. Cantilever (mm)Min. Min. Socket Length (mm) KA-CANT200 50150200 KA-CANT225 75150225 KA-CANT250 100150250 For Brickwork For Concrete
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!