Documents

INTERNATIONAL JOURNAL OF MACHINE TOOLS AND MANUFACTUR AUTHOR GUIDE

Description
This is a guide to publishing journal in Elsevier IJATM
Categories
Published
of 11
19
Categories
Published
All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
Similar Documents
Share
Transcript
  AUTHOR INFORMATION PACK1 Apr 2013www.elsevier.com/locate/ijmactool1 INTERNATIONAL JOURNAL OF MACHINETOOLS AND MANUFACTURE Design, Research & Application AUTHOR INFORMATION PACK TABLE OF CONTENTS . XXX . ã Descriptionã Audienceã Impact Factorã Abstracting and Indexingã Editorial Boardã Guide for Authorsp.1p.1p.1p.2p.2p.3 ISSN: 0890-6955 DESCRIPTION . The  International Journal of Machine Tools and Manufacture  is devoted to advances in scientificunderstanding of essential mechanics of processes and machines  applied to the manufactureof engineering components , mainly in metals , but also in composites, ceramics and otherstructural/functional materials.  It does not deal with large-scale natural organic materials. To thisend coverage is given to a range of topics that includes:ãEssential mechanics of processes  involving material removal, accretion and deformation , insolid, semi-solid or particulate formã Performance characteristics  of machine tools and machine tool work-piece systemsã Tool design , utilization and failureãSignificant scientific development of existing or new processes and machinesãApproaches to added value through geometrical/microstructural precision ã Micro manufacture The above list is not exhaustive and papers on other topics associated with process science/technologyor manufacturing hardware are welcome. Significant and useful advance of the current state of knowledge is an essential factor and it is important that papers are presented in a manner that will beappreciated by both academics and practising engineers. It is unlikely that papers dealing with theoryor modelling alone will be acceptable, unless a significant proven advance in scientific/technologicalknowledge is demonstrated. Likewise, papers in which the use of methodology predominates overtechnological advance would probably be rejected. Normally, multipart papers are not acceptable. AUDIENCE . Research workers, educationalists and practising engineers involved in the development of manufacturing technologies, hardware and management systems. IMPACT FACTOR  . 2011: 2.169 © Thomson Reuters Journal Citation Reports 2012  AUTHOR INFORMATION PACK1 Apr 2013www.elsevier.com/locate/ijmactool2 ABSTRACTING AND INDEXING . Applied Mechanics ReviewsCOMPENDEXCambridge Scientific AbstractsCurrent ContentsEngineering IndexScopus EDITORIAL BOARD . Editor -in-Chief  T.A. Dean, University of Birmingham, Birmingham, UK Regional Editors D. Axinte, University of Nottingham, Nottingham, UK P. Koshy, McMaster University, Hamilton, ON, Canada K. Rong, Tsinghua University, Beijing, China Reviewing Committee T. Altan, Ohio State University, Columbus, OH, USA Y. Altintas, University of British Columbia, Vancouver, Canada P.J. Arrazola, Mondragon Unibertsitatea, Arrasate-Mondragón, Spain D.K. Aspinwall, University of Birmingham, Birmingham, UK V.P. Astakhov, Michigan State University, East Lansing, MI, USA E. Budak, Sabanci University, Istanbul, Turkey S. Chen, National Taiwan Normal University, ROC, Taiwan K. Cheng, Brunel University, Uxbridge, UK .S-C. Chung, Hanyang University, Seoul, South Korea J. De Ciurana Gay, Universitat de Girona, GIRONA, Spain A. Di Illio, Università degli Studi dell' Aquila, L'Aquila, Italy A. Diniz, Universidade Estadual de Campinas (UNICAMP), Brazil K.F. Ehmann, Northwestern University, Evanston, IL, USA P. Franco, Universidad Politecnica de Cartagena, Cartagena, Spain W. Grzesik, Politechnika Opolska, Opole, Poland H. Huang, University of Queensland, QLD, Australia V.K. Jain, Indian Institute of Technology, Kanpur, India S. Joshi, IIT Bombay, Mumbai, India W. Klingenberg, Rijksuniversiteit Groningen, Groningen, Netherlands R. Kovacevic, Southern Methodist University, Richardson, TX, USA J.-S. Kwak, Pukyong National University, Nam-Gu, Busan, South Korea J. Lin, Imperial College London, London, England, UK G. Liu, Harbin Institute of Technology, Harbin, China B. -K. Min, Yonsei University, Seoul, South Korea T Özel, Rutgers University (Rutgers, The State University of New Jersey), NJ, USA T. Moriwaki, Kobe University, Kobe, Japan Z.J. Pei, Kansas State University, Manhattan, KS, USA Y. Qin, University of Strathclyde, Glasgow, UK P. Rao, IIT DELHI, New Delhi, India W. Rowe, Liverpool John Moores University (LJMU), Liverpool, UK A. Shih, University of Michigan, Ann Arbor, MI, USA T. Shirakashi, Tokyo Denki University, Chiyoda-Ku, Japan S. Shunmugam, Indian Institute of Technology Madras, Chennai, India J. Simao, Universidad de Castilla La Mancha, Ciudad Real, Spain I.N. Tansel, Florida International University, Miami, FL, USA I. Yellowley, University of British Columbia, Vancouver, Canada  AUTHOR INFORMATION PACK1 Apr 2013www.elsevier.com/locate/ijmactool3 GUIDE FOR AUTHORS . Description The  International Journal of Machine Tools and Manufacture  is devoted to advances in scientificunderstanding of essential mechanics of processes and machines  applied to the manufactureof engineering components , mainly in metals , but also in composites, ceramics and otherstructural/functional materials.  It does not deal with large-scale natural organic materials. To thisend coverage is given to a range of topics that includes:ãEssential mechanics of processes  involving material removal, accretion and deformation , insolid, semi-solid or particulate formã Performance characteristics  of machine tools and machine tool work-piece systemsã Tool design , utilization and failureãSignificant scientific development of existing or new processes and machinesãApproaches to added value through geometrical/microstructural precision ã Micro manufacture The above list is not exhaustive and papers on other topics associated with process science/technologyor manufacturing hardware are welcome. Significant and useful advance of the current state of knowledge is an essential factor and it is important that papers are presented in a manner that will beappreciated by both academics and practising engineers. It is unlikely that papers dealing with theoryor modelling alone will be acceptable, unless a significant proven advance in scientific/technologicalknowledge is demonstrated. Likewise, papers in which the use of methodology predominates overtechnological advance would probably be rejected. Normally, multipart papers are not acceptable. Types of Contributions: Original research papers, in accordance with the journal's aims and scope, reviews, shortcommunications describing concisely novel aspects of technology and having a maximum of fivefigures, review papers which provide a comprehensive survey and critical analysis of the state of the art of a particular aspect of manufacturing technology, letters to the editor (not exceeding 400words) which may be criticisms of recently published journal articles, preliminary announcements of important work and comments on current engineering matters of considerable interest.Notices of forthcoming meetings and exhibitions, conference reports and book reviews should besubmitted to the Editor-in-Chief  BEFORE YOU BEGIN Ethics in publishing For information on Ethics in publishing and Ethical guidelines for journal publication seehttp://www.elsevier.com/publishingethics and http://www.elsevier.com/ethicalguidelines. Conflict of interest  All authors are requested to disclose any actual or potential conflict of interest including any financial,personal or other relationships with other people or organizations within three years of beginning thesubmitted work that could inappropriately influence, or be perceived to influence, their work. Seealso http://www.elsevier.com/conflictsofinterest. Submission declaration Submission of an article implies that the work described has not been published previously (exceptin the form of an abstract or as part of a published lecture or academic thesis or as an electronicpreprint, see http://www.elsevier.com/postingpolicy), that it is not under consideration for publicationelsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsibleauthorities where the work was carried out, and that, if accepted, it will not be published elsewhereincluding electronically in the same form, in English or in any other language, without the writtenconsent of the copyright-holder. Changes to authorship This policy concerns the addition, deletion, or rearrangement of author names in the authorship of accepted manuscripts: Before the accepted manuscript is published in an online issue : Requests to add or remove an author,or to rearrange the author names, must be sent to the Journal Manager from the corresponding authorof the accepted manuscript and must include: (a) the reason the name should be added or removed,  AUTHOR INFORMATION PACK1 Apr 2013www.elsevier.com/locate/ijmactool4or the author names rearranged and (b) written confirmation (e-mail, fax, letter) from all authors thatthey agree with the addition, removal or rearrangement. In the case of addition or removal of authors,this includes confirmation from the author being added or removed. Requests that are not sent bythe corresponding author will be forwarded by the Journal Manager to the corresponding author, whomust follow the procedure as described above. Note that: (1) Journal Managers will inform the JournalEditors of any such requests and (2) publication of the accepted manuscript in an online issue issuspended until authorship has been agreed.  After the accepted manuscript is published in an online issue : Any requests to add, delete, or rearrangeauthor names in an article published in an online issue will follow the same policies as noted aboveand result in a corrigendum. Copyright  Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement' (formore information on this and copyright see http://www.elsevier.com/copyright). Acceptance of theagreement will ensure the widest possible dissemination of information. An e-mail will be sent tothe corresponding author confirming receipt of the manuscript together with a 'Journal PublishingAgreement' form or a link to the online version of this agreement.Subscribers may reproduce tables of contents or prepare lists of articles including abstracts for internalcirculation within their institutions. Permission of the Publisher is required for resale or distributionoutside the institution and for all other derivative works, including compilations and translations(please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works areincluded, the author(s) must obtain written permission from the copyright owners and credit thesource(s) in the article. Elsevier has preprinted forms for use by authors in these cases: please consulthttp://www.elsevier.com/permissions. Retained author rights As an author you (or your employer or institution) retain certain rights; for details you are referredto: http://www.elsevier.com/authorsrights. Role of the funding source You are requested to identify who provided financial support for the conduct of the research and/orpreparation of the article and to briefly describe the role of the sponsor(s), if any, in study design; inthe collection, analysis and interpretation of data; in the writing of the report; and in the decision tosubmit the article for publication. If the funding source(s) had no such involvement then this shouldbe stated. Please see http://www.elsevier.com/funding. Funding body agreements and policies Elsevier has established agreements and developed policies to allow authors whose articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specifiedas conditions of their grant awards. To learn more about existing agreements and policies please visithttp://www.elsevier.com/fundingbodies. Open access This journal offers authors a choice in publishing their research: Open Access ã Articles are freely available to both subscribers and the wider public with permitted reuseã An Open Access publication fee is payable by authors or their research funder Subscription ã Articles are made available to subscribers as well as developing countries and patient groups throughour access programs (http://www.elsevier.com/access)ã No Open Access publication feeYour publication choice will have no effect on the peer review process or acceptance of yoursubmission.All articles published Open Access will be immediately and permanently free for everyone to readand download. Permitted reuse is defined by your choice of one of the following Creative Commonsuser licenses: Creative Commons Attribution (CC-BY) : lets others distribute and copy the article, to createextracts, abstracts, and other revised versions, adaptations or derivative works of or from an article(such as a translation), to include in a collective work (such as an anthology), to text or data mine

1-5

Jul 27, 2017

Snake Bite

Jul 27, 2017
Search
Tags
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks
SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...

Sign Now!

We are very appreciated for your Prompt Action!

x