Description

Journal of Mathematics Research; Vol. 5, No. 4; 3 ISSN E-ISSN Published by Canadian Center of Science and Education A Two-Layered Suspension Blood Flow Through a Composite Stenosis Alana

Categories

Published

All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.

Share

Transcript

Journal of Mathematics Research; Vol. 5, No. 4; 3 ISSN E-ISSN Published by Canadian Center of Science and Education A Two-Layered Suspension Blood Flow Through a Composite Stenosis Alana R. Sankar, Sreedhara Rao Gunakala & Donna M. G. Comissiong Department of Mathematics and Statistics, The University of the West Indies, Trinidad and Tobago Correspondence: Alana R. Sankar, Department of Mathematics and Statistics, The University of the West Indies, Trinidad and Tobago. Tel: ext Received: August 4, 3 Accepted: October 3, 3 Online Published: October 5, 3 doi:.5539/jmr.v5n4p6 URL: Abstract Blood flow in the presence of a composite stenosis is investigated by examining the effects that red cell concentration, stenosis height and a peripheral layer have on blood flow characteristics. A two-layered model with a particle-fluid suspension in the core region and a peripheral plasma layer without any particles is used to represent blood. Expressions for three flow characteristics (impedance, wall shear stress and shear stress at the stenosis throat) are derived. Flow impedance increases with increasing hematocrit, stenosis height and diameter of the vessel but decreases with increasing tube length. The shear stress on the wall increases with increasing hematocrit, stenosis height and diameter of the vessel. Trends in the shear stress at the stenosis throat and impedance are similar with the variation of any parameter. The two-fluid model s flow characteristics are lower than those of the one-fluid model. In the analysis of the particle-fluid suspension the flow characteristics there were higher than when flow is considered to be particle-free. This knowledge of how the peripheral layer affects blood flow characteristics can aid in the understanding of diseased arterial systems. Keywords: composite stenosis, blood, impedance, shear stress, hematocrit. Introduction Studies of blood flow through stenotic arteries help scientists to understand cardiovascular diseases and allow for improved diagnostics of these diseases. Cardiovascular diseases arise out of a disorder of the cardiovascular system. The cardiovascular system, also known as the circulatory system, encompasses the heart and blood vessels of the body. It transports oxygenated blood from the left side of the heart via arteries of decreasing size down to the capillaries (the narrowest arteries). Here, there is an exchange of oxygen (and other nutrients) for carbon dioxide (and other waste products) which are then transported back to the heart through progressively enlarging veins to be re-oxygenated in the alveoli of the lungs. According to the World Health Organisation [WHO] (3), an estimated 7 million people die annually of cardiovascular related complications, thus making it a popular subject of scientific research (World Health Organisation [WHO], 3). It is predicted that cardiovascular diseases will remain the single leading cause of death worldwide with 3.3 million deaths by 3 (WHO, 3). The majority of deaths are caused by coronary heart disease which is disease of the blood vessels supplying the heart muscle or cerebrovascular disease which is disease of the blood vessels supplying the brain. Blood flow to the heart or the brain becomes blocked and usually leads to the occurence of a heart attack or a stroke respectively (WHO, 3). One of the major factors that lead to the prevalence of these two groups of cardiovascular diseases is the presence of stenosis in blood vessels. When an abnormal growth appears under diseased conditions in any location of the cardiovascular system such that it narrows any body, tube, orfice or passage, it is referred to by the medical term, stenosis (Young, 979). Many researchers studied the effect that stenosis has on blood flow characteristics after the early investigations of Mann, Hennrick, Essex, and Blades (938). These include the important contributions of Young (968), Lee and Fung (97), Nerem (974), MacDonald (979), Shukla and Coworkers (98), Srivastava (985), Haldar (985), Chaturani and Samy (986), Bitoun and Bellet (986), Chakravarty (987), Srivastava and Saxena (994). Some studies conducted have treated stenosis as a single stenosis being either symmetric, bell shaped or in shape, while others have considered cases non-symmetric where stenosis develops in series (multiple stenosis) or overlapping, irregularly shaped or even composite in nature. 6 Journal of Mathematics Research Vol. 5, No. 4; 3 An average adult has about five litres of blood which accounts for 7% of the human body (Guyton & Hall, 6). Since blood is a suspension of corpuscles, it does not always exhibit the characteristics of a Newtonian fluid especially in tubes with small diameters (Charm & Kurland, 974; Hersey, Byrnes, & Roam, 964; Haynes, 96). Based on Haynes (96) theoretical analysis and Cokelet s (97) experimental observations, a singlephase homogeneous viscous fluid analysis cannot be used to describe blood flow in blood vessels of diameter μm (Haynes, 96; Cokelet, 97). Generally in human blood, the hematocrit (red cell volume fraction) is approximately 45% and therefore has a strong influence on the flow properties of blood. The discovery that red blood cells (erythrocytes) should be treated as discrete particles was made in 97 by Skalak (97). L. M. Srivastava and V. P. Srivastava (983) proposed a two-phase macroscopic model (i.e. a suspension of red cells in plasma) for blood in small vessels (of diameter 4 μm) where the individuality of the red cells (of diameter 8 μm) is significant (L. Srivastava 983; V. Srivastava, 983). Srivastava (7) discussed briefly suspension modeling of blood flow (Srivastava, 7). Also, Bugliarello and Sevilla (97), Cokelet (97) and Thurston (989) provided experimental evidence of the existence of a layer of plasma containing no cells located layer near the walls and a core region containing all the erythrocytes suspended in plasma (Bugliarello & Sevilla, 97; Cokelet, 97; Thurston, 989). Thus a realistic description of blood flow through small vessels should involve this two-layered model. The significance of the peripheral layer increases as the flow in blood vessels of decreasing size is considered (Srivastava, 7). Srivastava and Saxena (997) performed an analysis of the effect of mild stenosis on blood flow using this model. Work done also considered the case of an overlapping constriction (Srivastava, Rastogi, & Vishnoi, ). A two-layered model of blood flow through a composite stenosis was considered by Joshi et al. (9) but this model consisted of two Newtonian fluids of different viscosities in which the effect of the hematocrit was ignored (P. Joshi, Pathak, & B. Joshi, 9). The inclusion of the hematocrit becomes important when analysing flow in small blood vessels. Blood flow through a composite stenosis was studied by Medhavi et al. () for a two-phase macroscopic flow but the existence of a cell-free plasma (Newtonian viscous fluid) layer near the walls was not taken into consideration (Medhavi, R. Srivastava, Ahmad, & V. Srivastava, ). Therefore, in this paper, the flow of blood through small vessels in the presence of a composite stenosis will be examined using a two-layered model with a peripheral layer and a core region of erythrocytes in plasma, which is an improvement on the exisiting models. The study of a composite stenosis is important since the shape of the stenosis which is manifested varies. The two-layered model for blood flow provides a more realistic model for flow in small arteries since the existance of the peripheral layer and the red blood cells in the plasma can no longer be neglected. This model allows the investigation of the effects of pheripheral layer, stenosis height and hematocrit on the blood flow characteristics with a composite stenosis being present. The negative effect that this stenosis has on the vessels of the cardiovascular system is seen.. Formulation of the Problem Figure. The geometry of the composite stenosis Consider an axisymmetrical flow through an artery. The artery is assumed to be uniform, rigid and circular. The composite stenosis is mild, axially nonsymmetric and radially symmetric. The wall near to the stenosis development is assumed to be solid. Entrance, end and special wall effects are not considered due to the assumption 7 Journal of Mathematics Research Vol. 5, No. 4; 3 that the length of the artery is much greater than its radius. A two-layered model is used to represent blood. It consists of a central layer of radius R of erythrocytes suspended in plasma and a Newtonian, viscous fluid layer which is the peripheral plasma layer of thickness (R R ). The geometry of the stenosis manifested, as shown in Figure, can be described as (Joshi et al., 9) (R(z), R (z)) = (, α) (δ, δ )(z d ) ; d z d + L () L = (, α) (δ, δ { ) + cos π ( z d L )} ; d + L L z d + L () = (, α) ; otherwise. (3) where R R(z) is the radius of the tube with constriction and are the radius of the tube without any constriction. The length of the tube is denoted by L and the length of the stenosis by L. The stenosis starts at z = d. In the unobstructed region, the ratio of the radius of the central core to that of the tube is α. The maximum height of the stenosis and bulging of the interface at the location where z = d + L in the stenotic region is (δ, δ ). In the core region, ( r R ), a two-phase macroscopic model is used. Since blood has a very complicated structure additional assumptions must be made to simplify the analysis (L. Srivastava 983; V. Srivastava, 983): (i) the red cell is spherical in shape and rigid, (ii) the artery wall is rigid and of infinite length, (iii) the flow has rotational symmetry, (iv) a modified Stoke s drag law governs the interaction between the two phases, (v) hematocrit is constant, (vi) red cell-cell interaction and brownian motion is neglected. The governing equations (both linear momentum and conservation of mass) for both the fluid and particle phases (using a continuum approach) are expressed as (L. Srivastava 983; V. Srivastava, 983; Drew, 979) ( ) u f u f ( C)ρ f + u f t z + v u f f = ( C) p r z + ( C) μ s(c) u f + CS ( ) u p u f, (4) ( ) v Fluid phase f v f ( C)ρ f + u f t z + v v f f = ( C) p r r + ( C)μ s(c) ( r ) v f + CS(v p v f ),(5) [ ] [ ] r ( C) v f + ( C) u f =, (6) r r z ( ) up u p Cρ p + u p t z + v u p p = C p r z + CS ( ) u f u p, (7) ( ) vp v Particulate phase p Cρ p + u p t z + v v p p = C p r r + CS ( ) v f v p, (8) ( ) ( ) rcvp + Cup =. (9) r r z Here ( r, z ) are two-dimensional cylindrical polar ( ) coordinate with z measured along the axis of the tube and r measured normal to the tube axis, = r r r r + is a two-dimensional Laplacian operator, ( ) u z f, v f and ( ) up, v p are the (axial, radial) components of the fluid and particle velocities. C denotes the volume fraction density of the particles, p is the pressure, μ s (C) μ s is the mixture viscosity (apparent or effective viscosity), S is the drag coefficient of interaction for the force exerted by one phase on the other, ρ f and ρ p are the actual densities of the material constituting the fluid (plasma) and the particle (erythrocytes) phases respectively; ( C) ρ f is the fluid phase density and Cρ p is the particulate phase density, and the subscripts f and p denote the quantities associated with the plasma (fluid) and erythrocyte (particle) phases respectively. A constant particle volume fraction, C, is chosen since the particles are assumed to be in a small concentration (Batchelor, 974, 976; Srivastava, 995). The suspension viscosity, μ s, has been chosen as the following empirical relation (Charm & Kurland, 974; Srivastava, 983) μ μ s (C) = mc, () 8 Journal of Mathematics Research Vol. 5, No. 4; 3 where [ ( ) ] 7 m = 7 exp.49c + exp(.69c). T () Here μ is the fluid viscosity (suspending medium). Blood s temperature, T, is measured on the absolute scale (K). Charm and Kurland (974) performed experiments to investigate the suspension viscosity using a cone and plate viscometer. A good agreement was found within % of the tested cases (Charm & Kurland, 974). It was also found to be reasonably accurate for C.6 (Charm & Kurland, 974; Srivastava & Saxena, 997; Srivastava, 995). The expression for the drag coefficient of interaction, S, from Stokes drag for small-particle Reynolds number modified to account for the finite particulate fractional volume (Tam, 969) is S = 4.5 μ ( 8C 3C ) + 3C, a ( 3C) () with a as the red blood cell radius. The flow is assumed to be steady with the additional conditions, δ/r o, Re (δ/l ), /L O() (L. Srivastava, 983; V. Srivastava, 983). Thus, the appropriate equations for flow in the core region are given as ( C) dp = ( C) μ ( s(c) r ) u f + CS ( ) u p u f, r R, dz r r r (3) C dp dz = CS ( ) u f u p, r R. (4) In the peripheral region, a Newtonian fluid is a suitable model for the plasma here. Assuming the flow is fully developed, steady, laminar, axisymmetric, and one-dimensional, the equation is written as (Young, 968) dp = μ ( r ) u, R r R. dz r r r (5) The boundary conditions (standard no slip conditions of velocities and the shear stresses at the tube wall and the interface) are given (Srivastava & Saxena, 997; Srivastava et al., ; Medhavi et al., ) as u =, at r = R, (6) u = u f and τ p = τ f, at r = R, (7) u f r = u p =, r at r =, (8) where τ p = μ u / r and τ f = ( C) μ s u f / r are the shear stresses of the peripheral and central regions respectively. 3. Analysis The expressions for velocities, u, u f and u p are found to be u = dp { (R/R ) (r/ ) }, R r R, 4μ dz (9) u f = R dp { μ (R / ) (r/ ) ] + ( C) [ (R/ ) (R / ) ]}, r R, 4 ( C) μ dz () R dp { u p = μ (R / ) (r/ ) ] + ( C) [ (R/ ) (R / ) ] 4 ( C) μ dz + 4 ( C) μ SR, r R, () where μ = μ /μ s. The flow flux, Q, is now calculated as { R R Q = π ru dr + r [ ] } ( C) u f + Cu p dr, R 9 Journal of Mathematics Research Vol. 5, No. 4; 3 which simplifies to πr 4 dp { [ Q = ( C) (R/R ) 4 (R / ) 4] + μ (R / ) 4 + β (R / ) } () 8( C)μ dz where β = 8C( C)μ /SR, is a non-dimensional suspension parameter. Since the sum of the fluxes in the two layers is equal to the total flux, one determines that R = αr and δ = αδ (Srivastava, 7). Thus the pressure drop, Δp (= p ar z =, p at z = L) across the stenosis is calculated from Equation () as where ψ = d L [ ] d+ φ(z) R/ = dz + d Δp = L ( ) dp 8( C)μ Q dz dz = ψ (3) πr 4 [ φ(z) ]R/ from Eq. () dz + d+l d+ L [ φ(z) ] R/ from Eq. () dz + L d+l [ φ(z) ] R/ = dz, φ(z) = η (R/ ) 4 + α β (R/ ), η = ( C) ( α 4) + μ α 4. In the expression for ψ, the third integral in closed form poses some difficulty so it will be evaluated numerically while the others are straight forward. Non-dimensionless expressions for the impedance (flow resistance), λ, the wall shear stress, τ w, the shear stress at the stenosis throat, τ s, are ( ) ( ) L /L ( C) R L λ = ( C) + η + α β L δα β { ( ) + ( L ) π π ( C) + L [ ( ) ( )]} η η η tan tan α β α β α β ( ) dθ (a + bcosθ) [ η (a + bcosθ) + α β ] (4) where τ w = τ s = ( C) η (R/ ) 3 + α β (R/ ), (5) ( C) η ( ) 3 + α β ( ), (6) λ N = L L L 6δL λ = λ/λ, (τ w,τ s ) = (τ w, τ s )/τ, λ = Δp/Q, τ w = (R/)(dp/dz), τ s = [ (R/)(dp/dz) ] R/ =( ), λ = 8μ L/πR 4, τ = 4μ Q/πR 3. Here λ and τ are the impedance and shear stress respectively for a Newtonian fluid in the absence of stenosis (i.e., C = ), and ( ) λ, τ w, τ s are (impedance, wall shear stress and shear stress at the stenosis throat) in their dimensional forms. In the absence of the peripheral layer (α = ) and particles in the blood (C =, Newtonian fluid), the following expressions are derived [ ] + L π πl dθ (a + bcosθ) 4, (7) ( ) 3 τ wn = (R/ ), 3 (8) τ sn = ( ). 3 (9) 3 Journal of Mathematics Research Vol. 5, No. 4; 3 4. Numerical Results and Discussion Plots of the analytical solutions are provided for the following parameter values (Young, 979), (MacDonald, 979), (Shukla et al., 98), (Joshi et al., 9): d = ; a = 4; L = ; L =,, 5; =, μm; C =,.,.,.3,.4,.5,.6; =,.5,.,.5,.; T = 5.5 o C, to observe the effects of the hematocrit, stenosis height, and the peripheral layer. The parameter α is computed using α = ε/ in which ε ε(c) represents the peripheral layer of thickness as a function of cell concentration. In order for the computation to be done, the temperature was chosen as T = 5.5 o C to be able to use Haynes analysis (Guyton & Hall, 6) where ε(μm) = 6.8, 4.67, 3.6, 3.,.58,.8 corresponds to hematocrit (%) =,, 3, 4, 5, 6 respectively. The parameter μ is computed with the use of Equations () and (). Simpson s rule is used to evaluate numerically the integral involved in Equation (4). For any stenosis height ( ), the impedance (λ) increases with the hematocrit (C) (Figure and Figure 3), which means that as the red blood cell count increases, the harder it is for the blood to flow due to the greater resistance to flow. Also, for any given hematocrit, as the stenosis height increases the impedance increases (Figure and Figure 3). Thus as the stenosis increases in size radially, the greater the resistance to the flow which also increases the difficulty for the blood to flow in the blood vessels. In this two-layered model, as the tube length (L) increases the impedance decreases (Figure 4), that is the longer the blood vessel remains without any branching occuring say, the easier it is for the blood to flow. Also, for any tube length, as hematocrit increases impedance increases (Figure 4) which again depicts that as the red blood cell count increases, the harder it is for the blood to flow with a composite stenosis being present..5 one layered: C= one layered: C=. one layered: C=.4 one layered: C=.6 two layered: C= two layered: C=. two layered: C=.4 two layered: C=.6 λ Figure. Impedance λ, versus stenosis height, for different hematocrits, C (with L = L =, = μm) 3 Journal of Mathematics Research Vol. 5, No. 4; 3.5 = =.5 =. =.5 =. λ C Figure 3. Impedance λ, versus hematocrit, C, for different stenosis heights, (with L = L =, = μm) for this two-layered model λ L=,C= L=,C=.4 L=,C=.6 L=,C= L=,C=.4 L=,C=.6 L=5,C= L=5,C=.4 L=5,C= Figure 4. Impedance λ, versus stenosis height, for different artery lengths, L (with L =, = μm) for this two-layered model The shear stress on the wall (τ w ) increases rapidly in the upstream of the stenosis throat (located at z = d + L ) and achieves its maximum at the throat of the stenosis before it begins to decrease downstream of the throat to the z endpoint of the constriction profile (located at L = ), (Figure 5 and Figure 6). As the stenosis height increases the shear stress on the wall increases (Figure 5), which means that as the stenosis grows radially it causes greater damage to the walls of the vessels due to the increase of the shear stress that occurs. Furthermore, in the presence of a composite stenosis ( =.5), as the hematocrit increases the shear stress on the wall increases (Figure 6), thus the more red blood cells present in the vessel the greater the shear stress on the wall which in time can further damage the walls. Trends in the shear stress at the stenosis throat (τ s ) and impedance (λ) are similar with the variation of any of its parameters. For any stenosis height, as hematocrit (C) increases the shear stress at the stenosis throat also increases (Figure 7 and Figure 8), which means that as the red blood cell count increases, the greater the shear stress at the 3 Journal of Mathematics Research Vol. 5, No. 4; 3 stenosis throat. Also, shear stress at the stenosis throat increases with increasing stenosis height for any given hematocrit (Figure 7 and Figure 8). Thus as the stenosis increases in size radially, the greater the shear stress at the stenosis throat, which in the long term may lead to its rupture. Additionally, in this analysis as the blood vessel diameter decreases, all three f

We Need Your Support

Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks

SAVE OUR EARTH

We need your sign to support Project to invent "SMART AND CONTROLLABLE REFLECTIVE BALLOONS" to cover the Sun and Save Our Earth.

More details...Sign Now!

We are very appreciated for your Prompt Action!

x